Key Features
Mild Detonating Cord Functions
MDC is normally manufactured in core loads ranging from 2.5 grains per foot (162 mg) to 100 plus grains per foot. The sheath materials, a continuous seamless construction, commonly used are tin, lead, aluminum and silver. The explosive core materials used are RDX, HNS, PETN, CH-6, HMX, and PBX-N5. We also have the capability to load unique explosive materials customers have the require loading into and MDC / MDF configuration.
In MDC / MDF, the detonation is defined as an exothermic reaction (explosion) that propagates beyond the velocity of sound. Mild Detonating Cord in most configurations will rupture when fired unless outer layers of fiberglass, Kevlar, tubing or steel braiding are added for partial or full containment. For added mechanical strength and environmental protection, the smaller diameter MDC sizes can be encased with polyethylene or nylon plastics. This will add approximately .01-inch wall thickness to the total cross-section.
You are viewing: What Is Detonating Cord
We use established standard acceptance testing for all MDC it manufactures including core load, moisture analysis, detonation velocity and dimensional checks. We also use its standards in conjunction with or in additional to customers testing levels and sampling, as appropriate.
Read more : What Is A Kingpin On A Truck
Shipping MDC / MDF is dependent on its final configuration. If being sent to customer on a spool the ends are adhesive sealed first to ensure no adverse effects on the explosive core. It is normally rolled on 12 to 24 inch spools. Shipping classifications will be dependent on the final product being shipped and classification approval by the appropriate agencies.
Benefits of our MDC/MDFB
- Long continuous lengths to transfer an explosive signal from one device to another.
- Adjust the amount of explosive to the size appropriate for the intended event, big or small
- Use different explosive and sheath materials to account for different environmental and platform interfacing challenges (i.e. temperature, diameter, shock, flexibility, etc.)
- Flexibility or semi-rigid design allows shaping for routing MDC/MDF or one of its next higher assemblies into simple or complex platforms/applications
- MDC/MDF can be used as a raw product or in next higher assemblies & components (Design application flexibility)
Reliability
The reliability of our Mild Detonating Cord (or Mild Detonating Fuze) to detonate over its entire length after proper initiation is estimated at greater than .9999 at 90% confidence level. This high level of inherent reliability can be enhanced in system application through the use of multiple (redundant) paths using similar cord.
Source: https://t-tees.com
Category: WHAT
