Which One Is Positive On A Car Battery

Reading Time: 4 minutes

So, you’re stranded in a strip mall parking lot with a dead battery. Thankfully, there’s a kind passerby who’s willing to give you a jump start, and you’ve got jumper cables in the trunk.

But there’s just one problem—you don’t know how to hook them up.

Why? Because you can’t remember which battery terminal is positive and which is negative. Hopefully, you’ve got your smartphone handy, so you can view this article and get clarification. Then you can get a jumpstart and (hopefully) be back on the road.

Typically, there is a red protective cover over the positive battery terminal.

How to Tell Which Side of the Battery is Positive and Negative

Determining which battery terminal is positive and which is negative is a relatively straightforward affair. Because mixing up a set of jumper cables can damage your vehicle, most automakers make it easy to tell the positive and negative terminals apart.

What Color is Positive on a Car Battery?

Refer to more articles:  Which Dmv Is Easiest To Take Driving Test In California

Some people wonder: Is red positive on a car battery? And the answer is: Yes—at least most of the time.

Typically, there is a red protective cover (or a black cover featuring a red plus (+) sign) over the positive battery terminal. The cover is there to prevent accidental shorting.

Of course, sometimes that cover is missing, and you have to look for other clues. Fortunately, most batteries also have a plus (+) and minus (-) sign stamped into the case.

As you might guess, the plus sign indicates the positive battery terminal, while the minus sign indicates the negative battery terminal.

Most batteries also have a positive and negative sign stamped into the case.

In many cases, the battery cable itself will also be red in color. Though sometimes it’s black (or just really dirty), so you can’t always go by color alone.

What Color is Negative on a Car Battery?

The negative battery cable is almost always black in color. But, as was mentioned, the positive cable may also appear to be black. That’s why you should always look for the plus (+) and minus (-) signs stamped into the battery case.

How to Hook Up Jumper Cables

The good battery should have the positive jumper cable attached to the positive battery terminal and the negative jumper cable attached to the negative battery terminal.

Jump starting a vehicle with a set of jumper cables is pretty easy. Here’s how it’s done:

Warning: Mixing up the jumper cables or touching the cable ends together can damage the vehicle and potentially cause personal injury.

  1. Put on your safety glasses and protective gloves.
  2. Attach one end of the positive (red) jumper cable to the positive terminal of the dead battery.
  3. Attach the other end of the positive (red) jumper cable to the positive terminal of the good battery.
  4. Attach one end of the negative (black) jumper cable to the negative terminal of the good battery.
  5. Attach the other end of the negative (black) jumper cable to a ground location on the vehicle with the dead battery. Heavy-duty, bare metal parts of the engine or chassis make good points for a ground connection.Warning: Do not connect the negative (black) jumper cable to the negative battery terminal of the dead battery. Doing so can create sparks that ignite the hydrogen fumes from the battery.
  6. Double-check that the connections are secure.
  7. Start the vehicle with the good battery and bring engine speed up to around 1,500 – 2,000 RPMs. Maintain that engine speed for a couple of minutes
  8. Start the vehicle with the dead battery.
  9. Once the engine begins running, disconnect the negative jumper cable that’s attached to ground.
  10. Remove the negative and positive jumper cables from the vehicle with the known good battery.
  11. Remove the positive jumper cable from the vehicle that needed a jumpstart.
  12. Allow the engine to run for approximately 30 minutes so that the alternator can charge the battery.
Refer to more articles:  Which Style Of Compressor Uses Belts To Turn The Compressor
On the vehicle with the dead battery, connect the negative jumper cable to engine or chassis ground.

The video below demonstrates the steps listed above:

When in Doubt, Consult Your Owner’s Manual

Still confused about battery terminals, jumper cables, and jumpstarting? No problem! The owner’s manual for your car lists detailed instructions on jumpstarting and battery care.

What’s more, if you’ve misplaced the print copy of your owner’s manual, digital versions are often available online. You can get them through the vehicle manufacturer’s website (e.g., Toyota.com).

Related Posts

Which Research Approach Is Best Suited To The Scientific Method

Surveys As a research method, a survey collects data from subjects who respond to a series of questions about behaviors and opinions, often in the form of…

Which Ankle For Ankle Bracelet

Which Ankle For Ankle Bracelet

An ankle bracelet, or anklet, can be worn with a casual, formal, or any other kind of outfit. Slip an ankle bracelet on whenever you want to…

Which Is Not A Function Of Epithelial Tissue

What is the epithelium? The epithelium is a type of body tissue that forms the covering on all internal and external surfaces of your body, lines body…

Which Animal Has The Best Memory

Memory is the brain’s ability to encode and recall the needed information. In other words, memory – the capacity, which enables the remembrance of events, thought, feeling,…

Which Of The Following Genotypes Is Homozygous

What is homozygous? In genetics, the definition of homozygous is when you inherit the same DNA sequence for a specific gene from each of your biological parents….

Which Lines Are Parallel Check All That Apply

Which Lines Are Parallel Check All That Apply

Parallel lines are the lines that do not intersect or meet each other at any point in a plane. They are always parallel and are at equidistant…