Where Do I Hit The Starter With A Hammer

image of a starter with caption Where To Hit A Starter With A Hammer"

Last December, we had an ice storm come through town. Overnight temperatures dropped to single digits. After the ice storm, a snowstorm followed and added a foot of snow.

Now, I hate the snow. It’s part of why I went to college in Pensacola and why I go back down there every chance I get. But life didn’t cooperate, so I was stuck in the Midwest for this disgusting storm.

There I was, curled up next to my fireplace in flannel pyjamas and a cup of hot toddy I was about to enjoy. At that moment, my friend texted. He was driving through town, had stopped for a bite to eat, and his car wasn’t starting. Could I come to jump his battery?

If it had been anyone else, I would have told him to call a tow service. I dislike snow that badly. But for my good friends, I’ll leave my hot toddy and flannel pyjama pants to go into the storm.

We jumped his car, but it still wasn’t starting. “Got a bad starter solenoid,” I mutter. “Got a tire-iron handy?” He rummaged in the back of his trunk for a minute before coming around with short tire iron.

Refer to more articles:  Where Can I Sell My Tools For Cash Near Me

Perfect.

I reached into the hood (thankfully, this was a Honda Civic, so the starter was easily accessible) and hit the solenoid three times.

“Try it now.”

He got in the driver’s seat and tried. His car started instantly.

“Don’t turn it off until you get home,” I warned as I climbed into my own car and got out of the cold.

How A Starter Works

Turning the key into the start position sends electricity into the starter control circuit. This current energizes the starter solenoid. Once energized, the starter solenoid (which is a tiny electromagnet) engages the starter.

The starter spins a gear up into the engine, where the gear teeth mesh with the engine’s flywheel (or flex-plate). After a few quick spins of the engine crankshaft, the engine’s combustion takes over, and you release the key, allowing the starter motor to disengage.

A starter can wear with age. Like most motors, a starter motor uses brushes made from graphite that wear over time. Rust can also accumulate on metal connections inside of the motor housing.

Inside the solenoid, it does not take much rust to interfere with its performance. A few gentle taps on the top of the starter are all that it takes to get the electromagnets moving again.

How To Fix A Starter With A Hammer

When you have a faulty starter, you can often get it to start a few more times by tapping it with a hammer or tire iron.

You are not repairing a bad starter with your hammer. You are just trying to jar it back into working a few more times.

Refer to more articles:  Where Can I Get Edible Pictures Printed

I prefer to tap directly on the solenoid portion to get the electromagnet to engage. Have 3 or 4 taps; I will have someone turn the key into the start position to see if it works. If it still doesn’t work, then I might try tapping on the side of the starter itself.

If that still doesn’t work, have someone try holding the key in the start position while you tap it.

After you start your car this way, it should be driven to a shop for a complete repair. You are dealing with worn-out brushes or a failing solenoid, and the starter needs a mechanic to replace it.

However, in emergencies or when trying to avoid a tow fee, this is a handy trick to have in your back pocket. Any auto shop will be able to install a new starter for you.

Symptoms Of A Bad Starter

  1. A car that cranks slowly.
  2. A car that clicks but doesn’t start.
  3. The interior lights dim when you try to start, indicating excessive draw.
  4. A grinding noise when you attempt to start the car.
  5. Whining noise when attempting to start.
  6. A whining noise after starting as the starter fails to disengage.

Frequently Asked Questions

How long will tapping the starter work?

I have had it last for a few months. Generally, I have to tap it once or twice the first month and then the tapping more and more frequently until it finally stops working. (I grew up really poor, and vehicle repairs got pushed off until the last minute).

Why do I have to hit my starter with a hammer?

A few good taps help to dislodge what is causing it to stick. On a weak starter motor, the vibration can help give the motor the help it needs to get free and start spinning. In some cases, the brushes are worn and need help contacting the commutator bars.

Refer to more articles:  Where Is Dewitt Michigan

Can you hit your starter with a hammer?

Yes, you can hit your starter with a hammer. However, I recommend doing it lightly and going for some gentle taps to help it get going again.

Related Posts

Where Are Water Chestnuts In Grocery Store

What are water chestnuts? Despite their name, water chestnuts (Eleocharis dulcis) are not nuts. They are aquatic root vegetables that grow in water-rich environments such as marshes,…

Where To Find Tomatoes Dreamlight Valley

Disney Dreamlight Valley is chock full of activities for players to take part in. Available on PC, Nintendo Switch, PlayStation and Xbox, Gameloft’s latest title brings iconic…

Where To Go After Maliketh

Where To Go After Maliketh

Following an Elden Ring walkthrough can help you stay on track in a huge, often overwhelming world with many directions you can go.You may be interested Where…

Where Is Skilla Baby From

Skilla Baby and his manager Nique are sitting on the fourth floor of Detroit’s Capitol Square Building relaxed and chill. Nique is scrolling on his phone while…

Where Can I Buy Quail

Jumbo Coturnix Quail are a great option if you don’t have much room! They are easy keepers, grow quickly, and are fun to raise. These birds are…

Where Is Stanford Kentucky

Danville, Kentucky, often referred to as the “City of Firsts,” holds a distinguished place in both the history and heart of Kentucky. Founded in 1783, it proudly…