Aside from actually figuring out the content of your character’s dialogue, you also need to know how to say who said what—dialogue attribution—and how to punctuate it. This post is all about these technical issues. It isn’t about how to write the content of dialogue, just how to express who is saying it.
Dialogue Punctuation
You are viewing: Which Sentence Suggests The Greatest Amount Of Psychic Distance
The current convention is to use double-quotes around spoken dialogue, so this post will be primarily about how punctuation should work within this convention. It’s worth noting that there are other options. For example, you can ditch the double-quotes, and instead use an initial em-dash to indicate speech:
—You’re not going anywhere, she said.
The em-dash for dialogue might raise eyebrows, but it is an option. Andre Alexis, for example, has used this punctuation for dialogue in his work. Another option is to ditch punctuation entirely:
You’re not going anywhere, she said.
If you ditch punctuation, you need to be extra careful with your writing to make sure it is obvious who is speaking. Cormac McCarthy and Margaret Atwood are two authors who have gone in this direction.
We’re going to go with the standard convention of double-quotes:
“You’re not going anywhere,” she said.
This is the standard: The quoted speech ends with a comma inside the double-quotes; the attribution is not capitalized unless it is a proper name; each new speaker sets off a new paragraph.
Those are the basics, so now we can look at different implementations, special cases, and how things might go wrong.
Dialogue attribution mid-sentence:
“And if frogs had wings,” she said, “they wouldn’t bump their ass when they hopped.”
The attribution comes in the middle of a quoted sentence, so we don’t need to capitalize the first word in the second piece of quoted dialogue, which is set off by a comma after the attribution.
This technique has the added effect of creating a subtle/implied pause in the speaker’s speech; the pause isn’t stated, but the reader feels it.
Dialogue attribution between spoken sentences:
“I don’t think that’s a good idea,” Gregor said. “Let’s go to the park instead.”
In this case, we end the attribution with the period. The second quoted dialogue starts with a capital, since it is a new sentence.
Dialogue attribution before spoken sentences:
Hagrid said, “Not in the fire-pit, you dolt!”
The quoted dialogue is a new sentence, so we get a capitalized first letter. The quoted dialogue is set off by a comma after the attribution.
Read more : Which Sentence Best Describes Vestigial Structures
Dialogue attribution with exclamation or question mark:
“Not in the fire-pit, you dolt!” she said.
For exclamation marks and question marks, just pretend that they end with a comma instead.
Implied attribution via action:
Sometimes, instead of explicitly attributing dialogue to a character, we have some action or event described in the same paragraph, and by that means imply who is speaking:
“That’s what I call a brew.” Hagrid stirred the cauldron. “Now where’s my eye of newt?”
For this implied attribution, you have to close the preceding dialogue. It is a mistake to leave the comma, as in the following erroneous construction:
✗WRONG✗ “Now that’s what I call a potion,” Hagrid stirred the cauldron. “Now where’s my eye of newt?” ✗WRONG✗
Dialogue interrupted by narrator:
“When I said I was hoping for a warm welcome” —passing laser-beams singed Darva’s helmet— “this isn’t what I had in mind!”
The interruption belongs to the narrator, and so the em-dashes are placed outside of the quotes. We can read this as a continuous spoken line, without an interruption, and the narrator only functions to add detail. You can use this same construction when the dialogue is actually interrupted, however…
Dialogue interrupted by action:
“Now this—” Darva fired her blaster and ducked behind the barricade “—is what I call a firefight!”
The break in the dialogue can optionally be represented by placing the em-dash within the quotes. This is not a firm rule. I have seen it both ways. It is acceptable to punctuate a break in dialogue using em-dashes outside the quotes, even if it is an action that causes a pause in the spoken dialogue (as in the previous example). The reader can tell from context whether the speech was interrupted.
Dialogue interrupted by another speaker:
“But mom, I just thought—”
“I don’t care what you thought!”
The interrupted dialogue is cut off with an em-dash.
Dialogue interrupting the narration:
Around the campfire, some of the warriors traded bravado— “I once killed two orcs with one swing!” —and others chewed their mutton.
You set off the interrupted narration the same way you would use em-dashes for an ordinary interjection, except that you contain the whole quoted dialogue within.
Read more : Which Wen Mingde Is Fake
Dialogue that trails off:
“I just thought that…”
Ellipses indicate a speaker that trails off.
“speaker/attribution” versus “attribution/speaker”:
Should we go with:
“Sure thing,” Aspen said.
Or:
“Sure thing,” said Aspen.
Technically, both are correct. However, unless you have a reason for doing otherwise, you should probably go with the first formulation. The second can sound slightly archaic, which is easier to hear if we replace the named entity with a pronoun:
“Sure thing,” said she.
It’s grammatical, but it sounds archaic. One exception is if we are using a long description in place of a name. It can be awkward to wait for the end of a long description before reaching the attribution:
“It’s just not my day,” the tall man with the overcoat and the handlebar mustache said.
In cases like these, it would be better to put the attribution first, followed by the long description.
Alternative Dialogue Attribution:
The standard dialogue attribution verb is “said”. Some people like to spruce up their dialogue by using alternatives like “continued”, “replied”, “stated”, “joked”, “answered”, and so on, or by adding adverbs, as in “said tersely”, or “said angrily”. As a matter of subjective taste, I would caution against such alternative dialogue attributions. They have their place, of course, but they are easy to overdo, and easy to do badly. If you want to give an overworked submissions editor a quick reason to put your story in the reject pile, excess or needless alternative dialogue attribution is a good way to do it. There are a few reasons for this.
For the most part, “said” is invisible to the reader, functioning more-or-less like punctuation. The reader passes over it quickly, and it doesn’t get in the way of reading. It keeps the pace quick. By contrast, synonyms like “stated” or “explained” or “answered” or “replied” add syllables and slow pacing without offering anything in return. This category of alternatives should be ruthlessly cut in edits. When you deviate from “said”, you should have a good reason for doing it, because it is always a trade-off with pacing.
Other alternatives attempt to add extra color. Words like “joked” or “pleaded” offer additional shades of meaning. In many cases, these should also be avoided. They are often redundant, since it should be obvious from the surrounding context and the content of the dialogue whether something is a joke or a plea, for example, so you aren’t getting anything by using these terms. They are also “telling” instead of showing—don’t tell us a character joked or pleaded; show us that it is a joke or a plea.
You also see alternatives that specify the manner in which something is said, like “shouted” or “whined” or “wheezed” or “screeched”. In many cases, these should be avoided. If you can’t tell that something was shouted, for example, that might be a problem with how the dialogue or the surrounding passage is written; write the scene and the dialogue so the dialogue sounds like shouting. As for wheezing and screeching, these sort of things can be useful for characterizing a manner of speech, but they need to be used in moderation. If your established baseline is “said”, and suddenly a character “screeches”, it will feel more screechy. Conversely, if you constantly use alternatives, the reader will begin to gloss over them, and they will have less effect. Your ability to use alternatives for effect depends on you using them sparingly and judiciously.
All of this applies as well to adverbial modifiers on “said”. You could write “said tersely”, or you could just write terse dialogue—the terseness should be in the dialogue, so explicitly indicating that it is terse is redundant, and it is also “telling” instead of showing. You could say “said angrily” or “said wearily”, or use any of a variety of emotion-laden adverbs on “said”, but in all cases this will constitute “telling” instead of showing; a better strategy is to write the scene in such a way that the emotion is shown instead of told. If the reader can’t tell that someone is angry or sad or happy without being explicitly told, this might indicate a problem with how the scene is written.
Of course, there are exceptions to all of this. The most important thing is to be controlled and judicious about your use of language. Developing craft is not about mindlessly following rules; it is about understanding the underlying rationales for the “rules” so that you can use whichever techniques are most effective for your story.
Final Words
Thanks for reading, and I hope you found this article on dialogue punctuation and attribution useful!
Source: https://t-tees.com
Category: WHICH
