HomeHOWHow To Make Post Apocalypse Gloves

How To Make Post Apocalypse Gloves

Table of Contents

With Mad Max Fury Road storming into cinemas in a visceral assault on just about every sense other than taste and with more events with Post Apocalypse elements or outright Mad Max inspired it made sense to share some tips on how to distress and age your kit properly, after all there is nothing worse in a post apoc world than clean kit.

First we will cover how to make clothing and kit go from off the shelf new to that dusty used look seen in so many films.

To begin you will need a few things, a bucket full of dust (I use a mix of cement, fullers earth and ash) a clear matt sealant, a tub of matt paint and gloves.

11267103_10100244207865121_3535867154118532841_n

Next you need something to age, for the purposes of this I have chosen a military style thigh mounted pouch. This is not off the shelf new but has had no ageing treatment thus far.

11258202_10100244207590671_7869027212600408571_n

Step 1

Apply the matt black paint to the item you want to age, try and spread the paint over your entire hand to avoid your clothing or kit to end up with big blobs of paint over it. Rather try and get an even finish over the areas you want to age.

Refer to more articles:  How Many Magical Silicone Gloves Sold Per Year Revenue

11046521_10100244207615621_4066255660775513328_n

Step 2

Now that the paint is on you want to get the dust on as quickly as possible to ensure it bonds with the still wet paint.

11164601_10100244207665521_2225799632613696030_n

Step 3

You now need to pat the dust into the material. You can do this as hard or as soft as you fancy, the aim is just to get the dust into the paint. Once this is done you need to spray the areas with dust with clear matt sealant. Do this from a distance of at least 12 inches. When you do this you will notice in some areas the paint becomes visible again, fear not.

11234817_10100244207745361_9026870251286285042_n

Step 4

The last stage is to apply another layer of dust, this will bond with the still wet sealant and get rid of the obvious paint marks.

10985399_10100244207790271_6290398722885755837_n

You now have something ready for the apocalypse, this effect works on just about any material and you can adjust the dust you use and how much you use according to what level of ageing you want on the kit. Other effects that work on top of this technique are oil and grease from engines, good quality fake blood and tearing the fabric to really add depth and charachter.

Below are a few examples of these other techniques used on top of the dust ageing

1533715_10100228665671801_5732558005388616588_n10450826_10100200236229631_4698191854947037845_n

The next tutorial will focus on guns and firearms of the apocalypse and how to create and age firearms that would make Nux smile!

Refer to more articles:  How To Clean Mold From Boxing Gloves
RELATED ARTICLES

Most Popular

Recent Comments