How To Make Fleece Texting Gloves - T-Tees - Your Answers Await, Life's Questions Unraveled

Table of Contents

A Quick Sewing Project—Texting Gloves

Here’s a quick sewing project—texting gloves. Use fleece scraps to create a comfy pair in an evening of sewing. Or, spend a little more time to embellish the gloves with a monogram for an added personal touch.

You may be interested

Notions, Fabrics, and Supplies

1/2 yard high-loft fleece
Matching all-purpose thread
Pattern Tracing Paper
Non-Permanent Marking Pen or Tailor’s Chalk
1/2″ wide Fusible Web

Cutting Directions

Prepare the Pattern

Using Pattern Tracing Paper, trace a 12″ x 14″ rectangle with the grain running the 14″ length.
Measure in 1″ from each edge along one 12″ side.
Draw a line from the point to the other 12″ side, tapering the pattern.
Mark a 1″ seam allowance along the 14″ edges.
Mark a thumb opening 2″ and 4-1/2″ from the narrower end of the glove.

Refer to more articles: How Much Does A Major League Baseball Glove Cost

There are two schools of thought on monogramming gloves or in this case, texting gloves: The monogram can either face outward or inward. I chose the outward option.

You are viewing: How To Make Fleece Texting Gloves

How to Monogram on Fleece

Attach embroidery unit.
Determine the embroidery design and transfer the design to your sewing machine.

Note from Nancy I used a font found in Personalize ‘N Stitch 2:0 and scrolls from the Delightful Daisies Collection.

Place a marking or embroidery-positioning sticker 4-5/8” from the top and 3-1/2” from the right side. On the opposite glove, use the same measurements, marking from the left side.

Position a Sticky-Back Tear-Away Stabilizer in the hoop.

Perforate the stabilizer inside the hoop with a tip of a pin. Tear away the paper covering.

Place fabric on the stabilizer, centering the marking or placing the stickered area in the middle of the hoop.

Move the needle to begin stitching over the mark or sticker. Remove the sticker.
Place a Wash Away Avalon Film Stabilizer over the fabric.

Embroider the design.
Tear away the excess wash-away stabilizer and gently tear the fabric away from the sticky-back stabilizer. If any residue of the wash-away stabilizer remains, spritz the fabric with water and the stabilizer will vanish.

Construct the Gloves

This series of steps features photography for the left-hand glove.

Clip to seam allowance at marked thumb openings.
Fuse a 2-1/2″ strip of Fusible Web at the ends of the clips as pictured.

Remove the paper covering from the strip. Turn under the seam allowances and press.

Stitch the seam allowances in place.

Press a 5/8″ hem at the top and bottom edge of the glove.

Meet the long edges, right sides together.

Stitch 1″ seam with a basting stitch, using caution to not stitch the thumb area.
Try on the gloves and adjust the seam width, if necessary, to fit your hand/wrist.

Restitch the long seam, reinforcing the thumb area before and after the opening.

Fold the 5/8″ hem along the marked crease, topstitch.
Turn gloves right side out.

Refer to more articles: How Many Boxes Of Gloves In A Case

More Knit Project Ideas

For more information on the Texting Gloves pattern and other knit sewing project ideas, check out my book, Sew Knits with Confidence.

Watch Sewing With Nancy online

Enjoy watching my two-part series, Sew Knits with Confidence, featuring basic to creative knit sewing techniques. Click to watch Part One and Part Two.