When you work with clay for the first time, you will want to know what to wear. You want to be properly dressed and comfortable, and you don’t want to ruin your clothes. Although many clays wash right out, the darker clays can stain.
When you’re doing pottery, it’s important to wear comfortable clothing that will allow you to move freely. You don’t want your clothes to get in the way or to restrict your movements. Baggy clothes can be a hazard, and tight clothing can make it difficult to move around. This article will discuss what you should wear when doing pottery. I will also provide some simple tips while working with clay.
You are viewing: What To Wear To Pottery Class
Affiliate Disclaimer: We are ambassadors or affiliates for many of the brands we reference on the website. As an Amazon Associate, I earn from qualifying purchases.
Comfortable Shirt/Pants
If your shirt is too tight, your arms could feel restricted when reaching over to play with your clay. If it’s too loose, it may get in the way. Make sure you’re not wearing a shirt that could hang down and get in your way. A T-shirt or cotton shirt with the sleeves rolled up seems to be the way to go.
It’s best to wear old loose-fitting pants. If your pants are too tight, it may be hard for you to bend over the wheel, or your pants can be too low, and your underwear may start to show. You can even wear shorts. You may get clay on your legs, but that’s ok if you don’t mind.
Playing with clay is not about looking hot. It’s about getting dirty, enjoying yourself, and crafting a unique work of art. If you don’t have any comfortable old clothes, Goodwill or any second-hand store would be a great place to go.
Older Shoes
Your shoes should be ones you don’t care about if they get dirty. You may want to keep your feet protected from any tools or other equipment that may slip out of your hands.
You will get water and clay on them sooner or later, and I’m pretty sure you don’t want to mess with trying to get the clay off. Having a pair of shoes just to wear for pottery is a good idea, that way, the clay doesn’t transfer anywhere in your house or car if you go to a studio.
Potters Apron
Read more : What Is In Alpha Brain Black Label
I would suggest using an apron because you are also working with water and the apron provides an extra layer of protection if you don’t want your clothes to get too wet or dirty. Aprons also have pockets to keep some of your tools for easy access. I wear this Split Leg Apron or Potter’s Apron. It’s lightweight and works the best on the wheel. I wear other Aprons when I’m not throwing on the wheel.
Check out my post on The Best Aprons for Potters. I model and review 4 of my favorites.
Clay dries on cotton aprons, and dust particles will release into the air while you are working. So if you don’t wash your apron often, you may want to get a more Wipe-able Apron of fiber-like Nylon material.)
Wearing Long Nails
You can have long nails, except they may get in the way and mess up your clay when throwing on the wheel. If you keep your nails long, there are ways to throw clay so you don’t miss out on the fun of throwing. It’s the same as playing the guitar or rock climbing, you must use the tips of your fingers. You can still have nice nails. However, it is a bit easier to mold clay when your nails are shorter.
If you can’t let go of your acrylic nails or long natural nails, you could try these alternatives first. Try using a sponge on the inside and your knuckle on the outside to pull up the clay. Or use only your knuckles when pulling up the clay. Using a sponge on both sides may also work. For more detailed information on working with long nails, check out How To Do Pottery With Long Nails.
Keeping your Hair up And Away from your Face
If your hair is shoulder length or longer, it’s best to keep it back in some way. It might get in your way or hang in your face. I have had a strand or two get caught in my clay and ended up spending time trying to get it out.
You could leave it and let the kiln burn it out. If a hair is visible on the pot, it could leave a pattern after firing. A shorter piece of hair may not matter as much, but as a rule, it’s best to keep your hair out of the way.
Wearing an old hat or a headscarf around your hair would work also. If you go with a headscarf that ties in the back, make sure the ends are not too long, they may hang down too far and get in your way as mine has. The fewer distractions, the better when you’re leaning over the wheel.
Keeping Rings On or Off?
Read more : What Is Masonry Sand
When working with clay, having your rings on may not be such a good idea. There are no rules about wearing them. It is entirely up to you. But there are a few things you should consider.
How expensive is your ring? You could lose a stone in the clay.If you end up throwing a lot of clay over time, the band will wear down. Unfortunately, rings have left patterns on my pottery. Therefore, it is best to remove rings when playing with clay.
Sensitive Hands? Keeping your hands soft
Wearing rubber gloves while you are throwing or handcrafting doesn’t work well at all. You can’t get the feel of the clay.Here is a guaranteed way to keep your hands soft. Put Lotion or Vaseline on your hands and put Cotton or Spa Gloves on overnight. I found this works great! My hands feel soft and smooth in the morning.
Contact Lenses
The worst thing for contact lens users is getting something caught between your eye and your lens. It is super irritating and, in some cases, can cause damage if not remedied. Is your class going to be dusty like the Sahara Desert? No. Use a little common sense, and bring your glasses with you just in case. Remember you want to be comfortable, so in the end, it is your choice.
Dust Mask
A Dust Mask is wise to have handy when you are working in an area where clay dust is getting stirred up. If you are working on a project in an enclosed area where you are spraying on glazes, working with clay dust, dry kiln wash, or mixing dry glaze, a dust mask is essential for health and safety. Dry clay and certain glaze materials can produce fine dust particles that, if inhaled, can be harmful to the respiratory system. This is especially true for silica dust, commonly found in clay and some glazes, which can lead to serious lung conditions like silicosis if inhaled over time. A dust mask effectively filters out these harmful particles, protecting the lungs from irritation and long-term health risks.
Rags and Sponges are Important
Having at least one damp rag is a must. You will need to wipe your hands from time to time. You will also be wiping clay off things you swear you never touched. Have a set of rags just for glaze and clay.Sponges are great for cleaning up the sticking clay, and the clay rinses right off your sponge.
Tip from my Teacher
Make sure you get any extra clumps of clay off your clothes and rags before washing. Excess clay will clog your pipes over time. Wash all your rags and clothes separately from the rest of your wash. I personally NEVER wash my Aprons, rags, or clay cloths in the washing machine. I wash them outside the old fashion way. If you can’t wash them outside, then washing them in the sink where your Sink Trap is also works.
POTTERY CRAFTERS THOUGHTS… Throwing Clay and Pottery Making is a lot of fun and very relaxing. Being prepared makes it even better. So, Let’s Get Dirty and play with some clay.
Source: https://t-tees.com
Category: WHAT
