CLR® Pro Calcium, Lime & Rust Remover – CLR® Pro Bath & Kitchen Cleaner – CLR® Pro Grease Magnet Cleaner – CLR® Grease Trap Treatment – CLR® Pro Septic Treatment – Tarn-X® Tarnish Remover – CLR® Stone Cleaner – CLR® Stainless Steel Cleaner – MSDS for CLR® Industrial Products
You are viewing: The Ultimate Guide to Using CLR Kitchen and Bath Cleaner
Have you ever wondered if you need gloves when using CLR Kitchen and Bath cleaner? Well, you’re not alone. Many people have questions about how to use this powerful cleaning product effectively. In this guide, we will provide you with all the information you need to know to make the most of CLR Kitchen and Bath cleaner.
How to Use CLR Kitchen and Bath Cleaner
In a well-ventilated area, while wearing household rubber gloves and standing on a non-slip surface, mix equal amounts of CLR and warm water. It’s important to test the solution on a hidden area before applying it to the entire surface. Then, apply the solution directly to the calcium, lime, or rust stain using a brush, cloth, or sponge. Rinse promptly with cold, clean water. Remember, never leave CLR on an area for longer than two minutes. If the stain doesn’t disappear, use CLR at full strength and then wipe and rinse promptly with cold, clean water. It’s crucial not to mix CLR with other household cleaners or bleach and never reuse the bottle.
Mixing CLR Kitchen and Bath Cleaner
CLR can be mixed with warm water in three ways, depending on the stain. For light stains and buildup, a diluted mixture is recommended. For more stubborn buildup, full strength CLR is recommended, but only after diluted CLR has been tried first. The dilution ratios are as follows: diluted 1 part CLR to 8 parts warm water, 50/50 with warm water, and full strength. In some rare cases, a 1 part to 12 part dilution has been recommended, such as when dealing with a water fountain made with rocks. Always remember to rinse with cold water to neutralize.
Cleaning Appliances with CLR Kitchen and Bath Cleaner
To clean your coffee maker, mix one part CLR to eight parts water. For single cup coffeemakers, use only one capful of CLR. Run the mixture through the coffee maker as if making coffee and rinse thoroughly with cold, clean water.
For coffee pots, pans, or tea kettles, pour enough CLR to cover the bottom of the container. Swish it around and add one cup of hot water. Allow the mixture to soak for two minutes and rinse thoroughly with cold, clean water.
To clean your dishwasher, run an empty load without detergent up to the main wash cycle and add half a cup of CLR. Finish the cycle and run an additional cycle with water alone to fully rinse the machine.
Read more : When I Think Of The Goodness Of Jesus
For washing machines, run your empty machine without detergent up to the main wash cycle. Stop the machine and add half a cup of CLR. Finish the cycle and run an additional full cycle with cold water only to rinse the machine fully. (Please refer to separate instructions for front loading machines)
To clean your humidifier, pour enough CLR into the humidifier to cover the bottom and use a brush or sponge to wipe away stains. Add hot water and soak until thoroughly clean. Rinse thoroughly with cold, clean water.
Precautions and Recommendations
While CLR is a powerful cleaner, there are certain surfaces you should avoid using it on. Do not use CLR on natural stone or marble, terrazzo, colored grout, painted or metallic glazed surfaces, plastic laminates, Formica, aluminum, steam irons, leaded crystal, refinished tubs, or any damaged or cracked surface. CLR may etch older sinks, tubs, and tiles, so caution is advised. Additionally, avoid contact with wood, clothing, wallpaper, and carpeting. Some laminated surfaces, like countertops, may be affected by rust removers, so clean spills immediately.
CLR is acidic in nature, so it should never be used in a spray bottle. The solution could “spray back” on your clothes or in your eyes, and the spray could drift.
When cleaning a showerhead, remove it and submerge it in a mixture of half CLR and half hot water. Leave it in CLR for two minutes, then remove and rinse to loosen up the buildup inside the showerhead. Repeat at full strength if necessary, rinsing thoroughly after each application. Use a brush or sponge to loosen up the buildup.
To remove hard water deposits from drinking glasses, pour half warm water and half CLR into a plastic bowl. Dip a clean, soft cloth or sponge into the mixture and apply it to the deposits. Rub thoroughly and rinse with cold, clean water. If the glasses are not completely clear, repeat the process at full strength if necessary.
If you used CLR to clean your glasses and it did not remove the deposits, the glasses may be etched. Unfortunately, there is no remedy to remove the cloudiness caused by etching. The only option may be to seek professional help from a jeweler for polishing.
It is not recommended to use CLR in steam irons. It could have an adverse effect on fabrics or the interior of the iron.
Read more : When Do You Sign A Lease For An Apartment
CLR should not be used on cars or car radiators. It may cause damage to the painted surfaces or drip onto aluminum, resulting in discoloration.
CLR is septic safe. By the time it reaches the septic system, it is neutralized with water. However, it is not recommended for use in swimming pools or on pool tiles due to the potential for toxic fumes or damage to the tile finish.
When using CLR on granite countertops, it is recommended to use CLR Pro Bath & CLR Pro Kitchen Cleaner, as CLR Pro Calcium, Lime, and Rust Remover may not be safe for granite.
CLR should not be used on clothes or fabric. If CLR is spilled on fabric, it must be rinsed immediately. It may lighten the fabric due to its lactic acid lightening capability.
CLR should not be used to clean paver stones or rugs. It is best to use appropriate specialty cleaners for these items.
Yes, you can use CLR to clean pet bowls. Dilute equal parts warm water and CLR to clean ceramic, stainless steel, or plastic bowls. Leave it on for two minutes and use a sponge or brush to agitate. Rinse thoroughly with cold water.
For filtration systems in natural gas compressors, CLR can be used if the filter is made from 304 stainless steel, polypropylene over polypropylene, and glass over 316 stainless steel. However, caution is advised, and testing in a small area is recommended.
Conclusion
CLR Kitchen and Bath cleaner is a powerful solution for removing calcium, lime, rust, and other stains from various surfaces. By following the correct usage instructions and precautions, you can effectively clean your appliances, fixtures, and other items. Remember to always test in a small area before cleaning the entire surface and use caution to avoid contact with incompatible materials. With the help of CLR Kitchen and Bath cleaner, you can keep your home clean and free from stubborn stains.
Source: https://t-tees.com
Category: WHEN