Dental handpiece is an indispensable special equipment in the process of dental diagnosis and treatment. Because it is expensive and must be reused, it must be sterilized by high temperature and high pressure. Moreover, dental handpieces are prone to suck back, so cleaning and maintenance of dental handpieces is a very important task. First, it must be cleaned inside and out, then dried with an air gun, and then injected with high-speed handpiece oil and blow-dried to drain the oil, and then inside and outside. Dry, bag and sterilize after inspection. Oral operation specifications: Each dental handpiece needs to be cleaned and maintained for more than 10 minutes, which not only wastes water, time and effort, but also increases the operator’s occupational exposure risk, and it is not easy to achieve standardized results. Therefore, there is an urgent need to develop a fully automatic artificial intelligence dental handpiece maintenance equipment to meet clinical needs. Our company has developed a dental handpiece cleaning and maintenance integrated machine according to the oral disinfection technical specifications and dental handpiece cleaning and maintenance requirements, which meets the disinfection technical specifications and The clinical use requirements are all controlled by automated computers, which reduces labor intensity and is recognized by the majority of clinical hospitals.
Instructions for use:
You are viewing: When Cleaning A Dental Handpiece It Is Important To
1. It is recommended to add cleaning enzymes when using this machine for cleaning. It is recommended to add 2ml each time, which can be increased or decreased according to the degree of contamination of the dental handpiece.
2. When adding brightener, you can add up to 70ml at a time, and you can use it multiple times when you add it once.
3. When adding soft water salt, it is recommended to add 300ml of water to the salt chamber for the first use, and then top up with salt (about 550g). During use, the salt shortage indicator lights up again, please fill up the salt by yourself, no need Add water. After adding enough salt, the salt shortage indicator will not go out before the salt is fully dissolved. Under normal circumstances, the salt dissolution time is 1-2 days;
Read more : When Does Financial Aid Get Disbursed For Fall 2023
4. Cleaning settings: Light speed cleaning is performed on slightly polluted handpieces, and the cold water cleaning time is 10 minutes;
Quick cleaning is a simple rinse of the handpieces, the cold water rinse time is 12 minutes;
Standard cleaning is for handpieces that are generally polluted or cleaned immediately, with a time of 20 minutes and 50° water temperature;
Deep cleaning is for handpieces that are heavily polluted or slightly dry, hot water cleaning 45° warm water cleaning, time is 97 minutes;
If you need to oil your handpieces for maintenance, please add maintenance programs in the standard cleaning, deep cleaning, and high temperature cleaning modes. After the maintenance program is successfully added, it will automatically enter the maintenance phase after cleaning, and the maintenance time is about 25 minutes.
Read more : When Is Gavin Casalegno Birthday
5. Maintenance settings: pre-drying: click on the pre-drying time setting, you can set the pre-drying time, the time setting is not less than 1 minute;
Oil injection: The oil injection time setting range is 0.1~25.5 seconds, and the recommended setting is 0.5 seconds. If the oil injection effect is not good, the oil injection time can be appropriately increased.
Maintenance: The maintenance time is set to not less than 1 minute, and the maintenance will start 5 minutes after the end of the oil filling.
Drying: The minimum drying time can be set to 0. When the drying time is set to 0, the drying function is turned off.
One-key oil filling: Manual oil filling is required. Press and hold one key to fill the oil, release it when the required amount is reached, and complete the one-button oil filling.
Source: https://t-tees.com
Category: WHEN
