Where Should Portable Fuel Tanks Be Filled - T-Tees - Your Answers Await, Life's Questions Unraveled

Table of Contents

Gasoline and gasoline fumes are the major cause of boat fires and explosions, so you need to take care when fueling to avoid spills and the spread of gasoline fumes. Gasoline fumes, in particular, often accumulate in the bilge area.

You may be interested

To make sure that you, your passengers and your boat avoid any potentially dangerous, even explosive, situations, it’s important that you follow these fueling guidelines.

You are viewing: Where Should Portable Fuel Tanks Be Filled

Always take the following precautions before you start to fuel your boat:

Secure the boat to the fueling dock and ensure that the engine has been turned off.
Unload any portable fuel tanks and have your passengers step off the boat and onto the dock. This will help keep the boat stable and minimize the likelihood of spills.
Make sure that no one is smoking in the area or that any flames are present. You should also turn off all electrical equipment that could throw a spark.
Close all doors, windows and hatches where gasoline fumes could enter. Once you’re done fueling, you’ll want to open all the doors, windows and hatches to allow for air to circulate through the boat.
A final precaution before filling your tank is to hold the nozzle firmly against the fill pipe opening to ground it against static buildup.

Refer to more articles: Where Can I Buy Double Cream

Now you can start to fill your tank.

It’s important to never fill the tank of your boat beyond 90% full. This leaves room for gas to expand and avoids the potential for overflow.
Ensure that all air vents and valves to the gas tank are open.
After you’re done fueling, tightly replace the gas cap. This will prevent the escape of fuel vapors. Wipe up any spills or leakage right away.
Before starting the engine again, take a good sniff to see if any fumes have escaped. If you smell fumes, increase air circulation to the area and wait until the fumes have fully dissipated before turning on the engine.

Boat Fuel Conservation

Fueling up your boat can be an expensive proposition but there are a few easy things you can do to help conserve fuel.

Boat Fuel Conservation Tips

Fueling up your boat can be an expensive proposition but there are a few easy things you can do to help conserve fuel.

The following tips will help you get better mileage and reduce the environmental impact that gasoline can have on marine life.

It’s important to never fill the tank of your boat beyond 90% full. This leaves room for gas to expand and avoids the potential for overflow.
Ensure that all air vents and valves to the gas tank are open.
After you’re done fueling, tightly replace the gas cap. This will prevent the escape of fuel vapors. Wipe up any spills or leakage right away.
Use the correct propeller for your engine and regularly check for damage from rocks or debris that can reduce your propeller’s efficiency.
Drain all water from the bilge before leaving; on smaller boats, use a bailing can or a portable bilge pump.
Keep your hull clean to reduce friction.
Always shut the engine off any time you are stopped or docked.
Plane smoothly and evenly at take-off and then throttle back to cruising speed once out on the water.
Always read the engine owner’s manual to learn more about how to properly operate your engine.