One 3,000 lb sack = 42 cubic feet = 1.56 cubic yards
Bentonite is packaged in bulk sacks with a bottom drawstring port and four lifting loops at the top of the sack. Less than truck load quantities that ship via enclosed van are palletized. Full truck load quantities may ship via flatbed freight without pallets. All bulk sacks have top lifting loops which slide over pallet forks for safe, stable handling.
You are viewing: Where To Buy Bentonite Clay
Full Truck Load of granular bentonite = 15 – 3,000lb sacks = 45,000 pounds
Bentonite is a natural expanding clay sealant that when exposed to moisture can expand 15X or more creating a very effective pond sealant when applied correctly.
Bentonite for Pond Sealing FAQ
Sodium Bentonite Source
Our bentonite clay is shipped directly from the mine in Northeastern Wyoming.
Bentonite Clay Application Rates for pond/lake bottoms
Read more : Where Can I Sell Diamond Rings
To properly apply bentonite to seal a pond, the pond must be drained and the bentonite clay then incorporated into the soil of the pond bottom and sides. The application rate for bentonite ranges from 2 pounds to more than 5 pounds per square foot depending on the soil characteristics. For clayey and silty soils, 2 pounds per square foot MAY be sufficient. For sandy soils 4 pounds MAY be sufficient and for soil containing gravel and rock, in excess of 5 pounds will be required to obtain a seal. Once the bentonite is applied, the soil should be disk harrowed to mix the soil and bentonite and then compacted.
Alternatively, a continuous blanket of bentonite can be applied to the soil and then carefully covered with clean soil or sand to prevent the clay from mobilizing into the water column. Placing the bentonite in a confined layer is far more effective as it forces the clay into adjacent soil pores creating a more effective seal.
Detailed Sodium Bentonite Application Instructions
For best results test application rates with your soils by treating a small area at the anticipated application rate. Drive a 12″ or larger diameter smooth wall pipe at least 8″ into the soil column. Manually compact the soil within the pipe and fill with 18″ or more of water. Measure the rate of decline in the pipe and adjust application rate for your soils as needed. 45 lb pails of sodium bentonite are available for testing application rates or treating small areas.
Free Standard Freight shipping to lower 48 states.
Lift gate service is unavailable for 3,000 lb sacks- Unloading equipment needed at delivery site. If lift gate is required, 2,000 lb bulk sacks are available.
Read more : Where Can I Get Lip Fillers Near Me
Allow 7-10 days for freight carrier delivery.
Bentonite Specifications
Granular Bentonite particle size = -8 Mesh
All bentonite particles will pass through a 0.0937″ opening. As with any “minus mesh” screened product, all particles are smaller than the mesh opening. This results in a gradient of particle sizes from the 0.0937″ to finer powder that is ideal for blending with soil and compacting.
Bentonite Swell Index = 30
Bentonite Percent Moisture = 16.6%
Aged Fann 600 = 34.0 (measure of viscosity)
pH = 7.75
Bulk Bentonite Clay Reviews – What our Customers are Saying
Source: https://t-tees.com
Category: WHERE
