It’s time to take a little break from the sewing machine and talk about fusible interfacing. It is a very handy tool that is really worth your time to learn how to use properly!
I first mentioned fusible interfacing in this post about important notions and tools you’ll need to know as you expand into new crafts and projects.
You are viewing: Which Side Of Fusible Interfacing Is Fusible
Interfacing is used to stiffen fabric so that your finished project will hold a certain shape. It’s usually used in collars and buttonholes but has many applications. Interfacing can be fusible or nonfusible. Fusible interfacing can be attached to fabric using heat, but nonfusible must be stitched to the fabric.
This post will help you learn to apply fusible interfacing using your iron. Remember, you can click any of the pictures to enlarge for clarity.
Things you’ll need:
- The piece of fabric on which you need to apply the interfacing
- A piece of fusible interfacing cut slightly smaller than your piece of fabric, typically about 1/4 inch from the cut edge
- Your iron on a medium/high setting
- A pressing cloth
- Some water, in a spray bottle if possible
Here I have set up everything that I need. I’m only attaching a small piece of fusible interfacing to fabric. Notice that the interfacing piece is slightly smaller than my fabric piece. When you trace a sewing pattern, generally you will trace the same size interfacing pieces as fabric pieces. However, before you attach the fusible interfacing, you’ll want to trim it to be about 1/4 inch from the edge of the fabric to avoid bulk.
Place your interfacing right side down on the wrong side of your fabric. In other words, place the fabric on your ironing board wrong side up. Then place your interfacing on top of the fabric right side down. The right side of the interfacing is the sticky side with raised bumps. The wrong side, which is smoother and not sticky, should be face up.
Then place your pressing cloth on top of both pieces. Your pressing cloth should be a thin piece of cotton fabric.
Next, spray the pressing cloth with water until it is damp. Dampen the entire area covering the fabric and the interfacing. If you do not have a spray bottle, you can wet your cloth in the sink, but a spray bottle will save you time. You don’t want your fabric to be soaking wet, and a spray bottle will help you aim right for the area that will be over the interfacing and fabric.
While you set up your fabric, interfacing, and pressing cloth, you should allow your iron to heat to a medium/high setting. Once your cloth is properly damp, press your iron firmly onto a section of the fabric and interfacing for 10-15 seconds.
Now there’s an iron-shaped dry spot right exactly I was pressing my iron! If you have your cloth at optimal dampness and your iron at optimal heat, the pressing cloth should be dry when you lift your iron. Repeat this until you have pressed your iron onto every section of the fabric and interfacing.
And voila! Now the interfacing sticks directly to the fabric even as I bend it, fold it, and wave it around.
There are varying weights of interfacing to choose from based on the weight of your fabric and your desired stiffness. When you go to the fabric store, they may have a guide handy next to their interfacing bolts to help you choose the right weight for your project.
Happy sewing!
Learni.st – Learn how to sew starting from step one Pinterest & Twitter – Follow for tips, ideas, and more Etsy – Shop Sew Me Your Stuff
Source: https://t-tees.com
Category: WHICH
