Magma is a molten and semi-molten rock mixture found under the surface of Earth. This mixture is usually made up of four parts: a hot liquid base, called the melt; minerals crystallized by the melt; solid rocks incorporated into the melt from the surrounding confines; and dissolved gases.
When magma is ejected by a volcano or other vent, the material is called lava. Magma that has cooled into a solid is called igneous rock.
You are viewing: Which Type Of Magma Has The Greatest Silica Content
Magma is extremely hot—between 700° and 1,300° Celsius (1,292° and 2,372° Fahrenheit). This heat makes magma a very fluid and dynamic substance, able to create new landforms and engage physical and chemical transformations in a variety of different environments.
How Magma Forms
Earth is divided into three general layers. The core is the superheated center, the mantle is the thick, middle layer, and the crust is the top layer on which we live.
Magma originates in the lower part of Earth’s crust and in the upper portion of the mantle. Most of the mantle and crust are solid, so the presence of magma is crucial to understanding the geology and morphology of the mantle.
Differences in temperature, pressure, and structural formations in the mantle and crust cause magma to form in different ways.
Decompression Melting
Decompression melting involves the upward movement of Earth’s mostly solid mantle. This hot material rises to an area of lower pressure through the process of convection. Areas of lower pressure always have a lower melting point than areas of high pressure. This reduction in overlying pressure, or decompression, enables the mantle rock to melt and form magma.
Decompression melting often occurs at divergent boundaries, where tectonic plates separate. The rifting movement causes the buoyant magma below to rise and fill the space of lower pressure. The rock then cools into new crust.
Decompression melting also occurs at mantle plumes, columns of hot rock that rise from Earth’s high-pressure core to its lower-pressure crust. When located beneath the ocean, these plumes, also known as hot spots, push magma onto the seafloor. These volcanic mounds can grow into volcanic islands over millions of years of activity.
Transfer of Heat
Magma can also be created when hot, liquid rock intrudes into Earth’s cold crust. As the liquid rock solidifies, it loses its heat to the surrounding crust. Much like hot fudge being poured over cold ice cream, this transfer of heat is able to melt the surrounding rock (the “ice cream”) into magma.
Transfer of heat often happens at convergent boundaries, where tectonic plates are crashing together. As the denser tectonic plate subducts, or sinks below, or the less-dense tectonic plate, hot rock from below can intrude into the cooler plate above. This process transfers heat and creates magma. Over millions of years, the magma in this subduction zone can create a series of active volcanoes known as a volcanic arc.
Read more : Which Lego Ninjago Character Are You
Flux melting occurs when water or carbon dioxide are added to rock. These compounds cause the rock to melt at lower temperatures. This creates magma in places where it originally maintained a solid structure.
Flux Melting
Much like heat transfer, flux melting also occurs around subduction zones. In this case, water overlying the subducting seafloor would lower the melting temperature of the mantle, generating magma that rises to the surface.
Magma Escape Routes
Magma leaves the confines of the upper mantle and crust in two major ways: as an intrusion or as an extrusion. An intrusion can form features such as dikes and xenoliths. An extrusion could include lava and volcanic rock.
Magma can intrude into a low-density area of another geologic formation, such as a sedimentary rock structure. When it cools to solid rock, this intrusion is often called a pluton. A pluton is an intrusion of magma that wells up from below the surface.
Plutons can include dikes and xenoliths. A magmatic dike is simply a large slab of magmatic material that has intruded into another rock body. A xenolith is a piece of rock trapped in another type of rock. Many xenoliths are crystals torn from inside the Earth and embedded in magma while the magma was cooling.
The most familiar way for magma to escape, or extrude, to Earth’s surface is through lava. Lava eruptions can be “fire fountains” of liquid rock or thick, slow-moving rivers of molten material. Lava cools to form volcanic rock as well as volcanic glass.
Magma can also extrude into Earth’s atmosphere as part of a violent volcanic explosion. This magma solidifies in the air to form volcanic rock called tephra. In the atmosphere, tephra is more often called volcanic ash. As it falls to Earth, tephra includes rocks such as pumice.
Magma Chamber
In areas where temperature, pressure, and structural formation allow, magma can collect in magma chambers. Most magma chambers sit far beneath the surface of the Earth.
The pool of magma in a magma chamber is layered. The least-dense magma rises to the top. The densest magma sinks near the bottom of the chamber. Over millions of years, many magma chambers simply cool to form a pluton or large igneous intrusion.
If a magma chamber encounters an enormous amount of pressure, however, it may fracture the rock around it. The cracks, called fissures or vents, are tell-tale signs of a volcano. Many volcanoes sit over magma chambers.
As a volcano’s magma chamber experiences greater pressure, often due to more magma seeping into the chamber, the volcano may undergo an eruption. An eruption reduces the pressure inside the magma chamber. As long as more magma pools into a volcano’s magma chamber, there is the possibility of an eruption and the volcano will remain active.
Read more : Which Of The Following Is Used For Scraping Tissue
Large eruptions can nearly empty the magma chamber. The layers of magma may be documented by the type of eruption material the volcano emits. Gases, ash, and light-colored rock are emitted first, from the least-dense, top layer of the magma chamber. Dark, dense volcanic rock from the lower part of the magma chamber may be released later.
In violent eruptions, the volume of magma shrinks so much that the entire magma chamber collapses and forms a caldera.
Types of Magma
All magma contains gases and a mixture of simple elements. Being that oxygen and silicon are the most abundant elements in magma, geologists define magma types in terms of their silica content, expressed as SiO2. These differences in chemical composition are directly related to differences in gas content, temperature, and viscosity.
Mafic Magma
Mafic magma has relatively low silica content, roughly 50%, and higher contents in iron and magnesium. This type of magma has a low gas content and low viscosity, or resistance to flow. Mafic magma also has high mean temperatures, between 1000o and 2000o Celsius (1832° and 3632° Fahrenheit), which contributes to its lower viscosity.
Low viscosity means that mafic magma is the most fluid of magma types. It erupts non-explosively and moves very quickly when it reaches Earth’s surface as lava. This lava cools into basalt, a rock that is heavy and dark in color due to its higher iron and magnesium levels. Basalt is one of the most common rocks in Earth’s crust as well as the volcanic islands created by hot spots. The Hawaiian Islands are a direct result of mafic magma eruptions. Steady and relatively calm “lava fountains” continue to change and expand the “Big Island” of Hawaii.
Intermediate Magma
Intermediate magma has higher silica content (roughly 60%) than mafic magma. This results in a higher gas content and viscosity. Its mean temperature ranges from 800° to 1000° Celsius (1472° to 1832° Fahrenheit).
As a result of its higher viscosity and gas content, intermediate magma builds up pressure below the Earth’s surface before it can be released as lava. This more gaseous and sticky lava tends to explode violently and cools as andesite rock. Intermediate magma most commonly transforms into andesite due to the transfer of heat at convergent plate boundaries. Andesitic rocks are often found at continental volcanic arcs, such as the Andes Mountains in South America, after which they are named.
Felsic Magma
Felsic magma has the highest silica content of all magma types, between 65-70%. As a result, felsic magma also has the highest gas content and viscosity, and lowest mean temperatures, between 650° and 800° Celsius (1202° and 1472° Fahrenheit).
Thick, viscous felsic magma can trap gas bubbles in a volcano’s magma chamber. These trapped bubbles can cause explosive and destructive eruptions. These eruptions eject lava violently into the air, which cools into dacite and rhyolite rock. Much like intermediate magma, felsic magma may be most commonly found at convergent plate boundaries where transfer of heat and flux melting create large stratovolcanoes.
Magma can intrude into a low-density area of another geologic formation, such as a sedimentary rock structure. When it cools to solid rock, this intrusion is often called a pluton. A pluton is an intrusion of magma that wells up from below the surface.
Source: https://t-tees.com
Category: WHICH
