Why does your ductwork make banging noises? Loud ductwork might take you by surprise. A popping noise could startle you while making dinner, or your latest binge-watch may get interrupted by what sounds like a loose can of tennis balls. How do you know if it’s just because of weather changes or if the noise indicates your ductwork needs repairs? Let’s walk through the possible causes of why your ductwork keeps making banging noises.
Related Article
You are viewing: Why Does My Ductwork Make Banging Noises
Why You Hear Banging Noises in Ductwork
HVAC ductwork is made of metal, and metal is extremely finicky. It expands with heat and contracts when it gets cold. Every time you crank up the AC or turn the furnace on, there’s a strong chance noise will follow. The pressure changes in the HVAC system along with the temperature, so the ducts expand and contract.
The ducts make popping or banging noises during and after these changes. The noise could be especially loud if you’re between seasons and it’s been a while since you last used the air conditioner or furnace.
Types of Duct Noises
Ducts make enough noise to start their own band. They don’t just pop and bang!
Popping and banging noises after you turn on some element of your HVAC system don’t always indicate problems. It’s just the ducts expanding and contracting. But if you persistently hear your ducts making the following noises, you should contact your local duct installer to inspect your system.
Related Article
You are viewing: Why Does My Ductwork Make Banging Noises
Rattling
Rattling noises usually indicate that metal parts are loose because the ducts are old. Connections loosen from years of static pressure, and seals stop working. Constant rattling is a cue that your ductwork is too old, especially if it gradually gets too loud to ignore.
Booming
If you frequently hear a booming noise, a likely cause is insufficient HVAC dampers. The boom starts where the duct’s plenum and trunk meet because it’s where the starkest temperature changes take place. If the damper is too old or missing, the boom will be heard throughout the supply ducts in your home.
Shaking
If you can see your ducts shaking or hear it (especially if there’s also a humming noise), chances are that the airflow is blocked. Dirty air filters are usually the culprit. Because air can’t enter the system with a blocked filter, the pressure decreases to the point that the ductwork shakes.
Read more : Why Is Making Money So Hard
Dirty filters create blockages and noise and slow down your HVAC equipment. The filters should be regularly inspected and cleaned, then replaced as needed. It will make the system far less noisy.
Scratching
Scratching and scraping noises often mean that you have a new roommate. A rat, squirrel, bird, or large insect may have made its way into the ducts. You should contact a local duct cleaner immediately in case it invites friends and they build nests or cause an infestation.
Whistling
Whistling sounds are the most confusing type of duct noise. If you frequently hear the ducts whistle, it could mean that the duct covers are the wrong size. Replacing them with the right size will get the whistling to stop.
However, depending on the type of ductwork you have, whistling can actually indicate your system is working great. HVAC professionals can tell the difference.
Possible Causes
Here are the most common causes of ductwork making noises.
Dirty or Ill-Fitting Filter
Dirty filters block the airflow. Excess hot air billows the ducts like a windsock, and then once the heating cycle stops, it sounds like microwaving popcorn because of the massive pressure drop.
Filters should be regularly cleaned and replaced when needed. When you run the heat often in colder months, check the filter once a month. Filters should also be appropriately sized for your HVAC system, as gaps can cause whistling. Non-pleated filters also create less noise than traditional pleated filters.
Most people need to replace the filter every two to three months. However, you may need to change the filter once a month if any of the following apply:
-
You have pets
-
You live in an area prone to dust storms
-
Read more : Why Is Tim Rose Not On Barnwood Builders
Your hobbies or work at home produce a lot of dust, such as plaster ceramics
Dirty Ducts, Vents, and Fans
It’s not just filters that get dirty. The ducts themselves need an occasional cleaning. Vents and fans accumulate dust and dirt, which traps warm air and constricts airflow just like dirty filters do. Cleaning the ducts, vents, and fans improves air quality and noise levels.
Old Dampers
Dampers assist the airflow and control its direction in your ductwork. They can make banging noises when they blow open and bang shut. If your dampers keep opening and closing, they’re probably too old. Spring-loaded backdraft dampers are their modern replacement designed to stay closed most of the time. They only open when necessary.
Adjusting the actuator in the dampers can also prevent them from constantly opening and slamming shut. If the problem is persistent, replacing the dampers may be a better option.
Lack of Insulation
Insulation around the ducts running through the basement can help dampen loud noises. HVAC duct insulation costs around $2,500 on average. If you have round ducts, duct mufflers are another option to pursue since they have built-in insulation.
Ducts Are Too Small
There are different types of ductwork, and your current air ducts might be insufficient for your home’s heating and cooling needs. Larger ducts can be quieter than small ducts since the air supply is increased and airflow less constricted.
Bigger ducts help, but there are different duct shapes on the market today. Rectangular ducts make a lot of noise because they can’t handle pressure changes well. Still, they are popular because they look slick and provide creative ways to hide ductwork. Round ducts are much quieter, but they won’t fit in all homes.
Changing to a ductless system may be an option if your HVAC system seems too noisy despite no underlying problems.
Blocked Furnace
Furnaces get dirty, just like your ductwork and filters. Banging noises might indicate a furnace with carbon accumulation. Because the ignition is delayed if the burners are covered in buildup, the high volume of gas that ignites creates a loud bang. This is a fire hazard, so unusual loud bangs should be inspected immediately.
Single-Speed Blower
HVAC systems with single-speed blowers are noisier than ones with variable-speed blowers. Single-speed only turns on and off, which causes pressure and temperature shifts every time, plus resultant noises. Variable-speed blowers are quieter and more energy-efficient because they’ll “cruise control” at high speeds and then adjust to gradual temperature changes.
Source: https://t-tees.com
Category: WHY