Why Won’t My Oculus Turn On

When your Oculus Quest 2 headset is not turning on, it can be due to a number of reasons. This can include an insufficient battery in which case you will have to charge your headset before using it. In addition to that, there are different factors that can also come into play when you are encountering this issue. In some cases, the problem can occur when your headset has undergone an unexpected state due to an improper shutdown and as a result, it won’t turn on. Regardless of the reason, in this article, we are going to show you how to resolve the problem in question so just follow through.

As it turns out, Oculus Quest headsets quickly rose to fame due to the social media giant Meta behind it. While the headset works just fine most of the time, there are sometimes cases where it throws up an error such as the Can’t Reach Oculus Runtime Service message. However, when your headset is not turning on at all and you are faced with a black screen, it can be quite troublesome.

You are viewing: Why Won’t My Oculus Turn On

That said, there are a number of workarounds that you can apply in order to get the issue fixed and have the headset boot up as it normally would. First of all, make sure that you are holding down the Power button for at least three seconds while trying to turn it on because a single tap does not boot up the device. If it still refuses to boot up, you may continue with following the methods provided down below.

1. Perform a Hard Reboot

Read more : Why Are Catalytic Converters Valuable

The first thing that we would recommend doing when you come across this issue is to perform a hard reboot. As it turns out, in some cases, the device may not be turning on properly due to a forced shutdown which could’ve rendered it to an unexpected state. In such a scenario, performing a hard reboot should fix the issue. Do not worry as doing this will not reset your settings.

Performing a hard reboot is rather simple. To do this, press and hold the Power button for more than 30 seconds. You might need to hold it for around 60 seconds even in some cases. Once you see the LED light turn white, you can let go of the power button as this is the indication that the device has been hard rebooted. See if that fixes the problem for you.

2. Check your Charging Cable

It is possible that your Oculus Quest 2 may not be turning on because it does not have enough charge to boot up. These devices can drain the battery pretty quickly especially when you have been busy in virtual reality for quite a while and lost track of time. As it turns out, we would recommend leaving your Oculus Quest headset plugged in for some time to make sure that it has sufficient charge before using it again.

When you are charging the device, do look for the charging light indicator. It is also possible that even though you may have left the headset to charge but due to an issue with the charging cable or a loose connection, it may not have charged at all. If there is no charging light indicator even if you have plugged it in correctly, chances are that your charging cable may have malfunctioned in which case you will have to try an alternate charging cable to see if that gets your headset to charge.

3. Try Booting into the Boot Menu

Read more : Why Is My Bathroom So Dusty

When your Oculus headset is not booting up as it normally would, there is an alternate method that you can use to get it to boot up. This is used when you have to troubleshoot your device or for other purposes as it takes you to a boot menu instead of booting up the device as it used to.

You can, however, use this to your advantage and once the headset has booted into the boot menu, you can simply exit it and ask it to boot normally. To do this, follow the instructions given down below:

1. First of all, hold down the Power button and the Volume Down button on your headset simultaneously for more than 20 seconds.
   

   

2. Once you do that, the device should boot into the boot menu. From there, you can use the volume keys to navigate to the “Exit and Boot Device” option and then press the Power button to confirm the action. See if that gets you back in.
   

   

4. Perform a Factory Reset

While performing a factory reset is never a favoured option, it is something that you might have to do once in a while to get around an issue. As it turns out, when nothing else seems to help, performing a factory reset can often resolve the issue as it resets your headset settings back to the factory defaults.

There are two ways using which you can perform a factory reset. If you have connected your phone to your headset, you can use the Oculus app on your phone to perform a factory reset. Alternatively, you can also use the manual approach and factory reset the device from the boot menu. To do this, follow the instructions given down below:

1. First of all, you will have to boot into the boot menu. To do this, press and hold the Power and Volume Down buttons on your headset until you see the boot menu appear.
   

   

2. On the Boot Menu, use the volume keys to navigate through the options and choose the Factory Reset option.
   

3. Press the Power button to confirm your choice. Confirm your action on any follow-up dialogs. With that done, your headset will now be restored to its factory defaults.
4. After that, see if the headset powers on now.

Source: https://t-tees.com
Category: WHY